Segmental Fan Belt Material, Non-Metallic, 4 foot

Segmental Fan Belt Material, Non-Metallic, 4 footGhosts need a four foot section. The same belt is used for the generator on the transmission driven generator cars. Note that segmental belts cannot pull the same load as modern endless belts and in general are not suitable for use with large alternators. Also note they are directional and must be installed in the correct orientation. Part No. MP JK31418

0-5 PSI mechanical

but these fasteners will eliminate the other major blade failure problem

a gas gauge

Note that many in service have been polished by either simply cleaning over the years or by action by previous owners

MP-104-105

Brass Gauge Glass only

particularly for sump and water cover studs that have pulled out of their substrate

Designed for and tested on both early car manifolds and Springfield manifolds with drain pipes and locating ears with slots on the first and last ports

Everything else is included

12V Negative Ground = Pertronix P/N module 9

It includes a brass sight gauge so you can visually check the oil level without having to drain oil from the sump

The blocks can be cut into sections if desired